Charlotte sang affectionately toward Ma Dongmei. “It’s good to be one time. I’ll stay with you forever. You know, I only want to...†and I feel very moved when I look at the text. It's like once, love is the same; once it's good, it's the same with decoration. The decoration may be so once or twice for many people, so I would like to do some perfection. However, in the face of complicated procedures and professional skills, the brain is like twine. Especially winter decoration, the influence of temperature, etc. make decoration more difficult. In order to make everyone's "one time" as perfect as possible, Xiao Bian has organized the winter decoration notice for everyone.
First, use plastic to ensure that the temperature is not delayed
The winter decoration needs to pay attention to the use of plastic, if the use of plastic when the improper operation, easy to glue due to quit, leading to delays and other circumstances.
1, common problems
When decorating, there may be many places where glue is used, ceilings, walls, interior decorations... These things are inevitably used in the construction process, and some special parts may also use a lot of glue. Low, even if the glue does not fail, there is still adhesion, but its slow dry, affecting the construction process, is likely to slow down the progress of the later period.
2. Solution
Keeping the normal state of the glue and the room temperature of 5 degrees Celsius above zero is very necessary. At the same time, the glue contains almost all the chemical components, and it slows down when it dries slowly, which affects the indoor air quality.
Second, cement and antifreeze temperature guarantee
Cement and anti-freezing agent ensure the temperature, especially in the northern regions. The cement is vulnerable to freezing, which will delay the construction period.
1, common problems
Tiling is an important project in the renovation of a house. Cement is used in tiling, and the application of cement is also particular. In winter construction, the cement after being stirred may be ineffective once it is cooled. In addition, the more serious is that after the bricks have been attached, the sudden drop in temperature will seriously affect the strength of the cement and threaten the quality of the project. Moreover, the low temperature will increase the solidification time of the cement, which is unprofitable in the construction period.
2. Solution
In the use of cement, we must pay attention to insulation, in particular, has been posted a good brick, the temperature suddenly dropped, the most likely to affect the strength of cement. Xiao Bian suggested that in winter construction, it is best to add antifreeze to the cement, To ensure the quality of construction. When the villa's terrace is tiled, it must be covered with a layer of external insulation material to achieve double insurance.
Third, do not brush dry paint from cracking
Paint brush Do not worry, paint brush is good again, pay attention to check whether the paint is dry, if not dry on the next brush, paint is easy to crack.
1, common problems
The maximum moisture in the paint, so the most affected by the temperature. Paint brush three times, a layer of primer, two layers of paint, in the process, the most taboo on the first layer did not dry to start brushing a layer. In winter, when the temperature is low, the water evaporates slowly, and the paint naturally slows down. At this time, it is very likely that in order to grab the period of time, a layer of paint will be brushed in if the upper layer is not dried.
2. Solution
Once there is a phenomenon in which the upper layer is not dried and the next layer is brushed, it is highly likely that after the heating, the temperature suddenly rises and the temperature difference between the front and rear is too large, causing the wall to peel, blistering and even cracking. This phenomenon, brushing paint should pay attention to the indoor temperature, to allow a layer of paint to dry through the film and then brush the second time, do not affect the construction quality in order to grab the construction period.
Fourth, the floor adapts to room temperature thermal expansion and contraction
During the winter decoration, the installation of the floor should also pay attention to the temperature, the cause of thermal expansion and contraction, and the installation of the floor joints in the winter must be sufficient. Otherwise, in summer, the floor expansion causes deformation and cracking.
1, common problems
The basic knowledge of thermal expansion and contraction may be known to everyone, but may not be able to attend so much in the decoration. Due to the temperature difference caused by the deformation of the floor, cracking and other phenomena, rework and other issues plagued many newly renovated soon After the owners friend.
2. Solution
Most brands of warehouses have no heating equipment, so wood shrinks there. Therefore, when the floor is shipped home, it must be placed for a day or two so that the wood can adapt to the temperature of the home and start again. Floors are laid so that no distortion or cracking of the floor occurs due to excessive temperature differences. However, this is not enough. Because of the poor temperature in the four seasons, in order to prevent the phenomenon of thermal expansion in summer, when laying floors in the winter, care should be taken to keep the gaps larger to prevent possible “hot bulging†hazards in the summer.
Decoration note decoration construction knowledge
Window Screen,Window Net Screen,Window Screen Roll,Metal Window Screen
ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyufence.com