What do you need to pay attention to when using a high efficiency crusher?

The crusher is generally a crushing device used when the customer requires a relatively small particle size, and the crusher is an efficient crusher. In recent years, Shanghai Shanzhuo's efficient crusher has been widely used in many areas at home and abroad, and has received good response. In this paper, what should be noted when using the efficient crusher in the Zhuozhuan analysis:
1. First, ensure that the voltage of the crusher equipment is sufficient. If we see that the voltage is not stable at the time of this machine, if we do not pay attention, it will lead to damage due to voltage problems. This is unfavorable to us, not only to machinery. No use, but also our equipment is damaged, so we must ensure that the voltage is stable before work, so as to ensure that the voltage is stable we can effectively start, if the voltage is unstable we can not start.
2. Before the operation of the crusher, we pay attention to the inspection of the mechanical parts. If there are any problems with the parts, we must maintain them in a timely manner. This is very important, and we can see the brief inspection time of a few minutes. Long-term inspections are also very good for the machinery itself. It is important that we insist that it will not take much time to repair it every day.
3, to see if the hammer of the crusher is damaged, we know that after the long-term work this hammer is particularly prone to problems, then how to do and the solution is to protect the hammer. We see that the work efficiency of the shredder is relatively high and effective. Carefully check the work before using the crushing equipment, so that you can extend the life of the machine, so we have to prepare some before using the crusher to avoid problems in the work.
222

Drill and tap set

Taps and dies are tools used to create purpose screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading.
Using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies-called chasers-made for that purpose.

Drill And Tap Set,Hand Tap And Die,Cutting Tool Sets,Hand Tap Wrench

Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com