Wiping the glass, holding the dust, cleaning the floor, decontamination and disinfection of kitchens and toilets, cleaning up the decoration traces, and wiping the furniture are the service areas of the cleaning work. The following Xiao Bian will specifically analyze the general operation procedures for the pioneers' house cleaning and cleaning.
1. First clear up the construction and decoration waste left on the site;
2, then use a high-power vacuum cleaner to vacuum from top to bottom;
3. Glass window: wipe the glass frame with a towel first, and then dilute the diluted glass solution with a water dispenser, apply the glass evenly from top to bottom, and remove any stubborn stains with a blade. Repeat the above procedure and then scrape it from top to bottom with a scraper. Wipe the traces of water left on the frame with a dry towel. The water mark on the glass is wiped clean with the machine skin.
4, bathroom: adhere to the principle of the top-down, first recognize the material of the toilet top, is made of PVC or aluminum plastic plate or paint top. According to different materials, different cleaning methods are used for cleaning. Use a scrub brush to clean the walls of the bathroom, focusing on the cracks in the tiles and the glue marks and paint spots left on the surface of the tiles. Use a towel to clean the toilet's sanitary ware and clean it with stainless steel washer fluid for all taps and fittings. Use a floor scrubber to perform the final cleaning of the floor, especially the corners of the floor. Use a cleaning ball to perform targeted decontamination and cement removal on the corners that are not washed by the washing machine. After the last inspection, if there is no omission, wipe the pipe with a dry towel and wipe it again.
5, kitchen: The cleaning process is the same as above. Note: Due to the large number of stainless steel fittings in the kitchen, it should be the focus of cleaning.
6. Bedrooms and halls: The walls are cleaned with dust collectors, wipe lamps, switch boxes, exhaust outlets, air conditioning outlets, exhaust outlets, etc.
7. Doors and frames: Distinguish the material of the door, dilute it with a professional cleaner, and wipe with a towel. The procedure is also from top to bottom, the towel is folded into a box and the top is wiped from the left to the right. There can be no omissions. There are glue stains where glue can be used for treatment; the procedure of the box is the same; it must be done without omissions. No dead ends.
8, the ground cleaning: After all done, that is, the ground cleaning, the ground should also be divided into material, is a wooden floor, or ceramic tile, or stone, when the separation after the selection of special cleaning agent diluted, Start cleaning. The glue stains on the ground can be removed with blades, and stubborn glue removal agents can be used. After the last process is finished, the foreman must fully inspect it and confirm that there is no leftover and then leave the scene.
9, the angle line: wipe with a towel, with a blade to remove all kinds of plastic traces, paint points and so on.
Cleaning Landscaping Cleaning Tile Glass Coating Stainless Steel Switch Windows Floor Tiles Glass Tiles Glass Doors Glass Furniture Kitchen Glass Sliding Doors Bathroom Tiles Bathroom Doors Bedroom Lighting Tiles Tiles Kitchen Tiles Small Bedrooms Floor Tiles Bedroom Lamps
Solder For Electronic Work,Tube Solder Wire Rosin,18Grams Core Welding Wire,Solder For Electronic Work Tube
NINGBO XIHAN TIN SOLDER CO.,LTD. , https://www.soldertop.com