Most people clean the hood, they are used to disassemble cleaning, which is a waste of time, but also easy to damage the parts. Now we introduce a cleaning method that eliminates the need for dismantling machines and saves time and effort.
Shuaibang Design     Tong Ji . Yu Run
1. Take a plastic bottle (a variety of beverage bottles that can be pinched by hand), poke more than 10 small holes on the lid with a sewing needle, then, put a proper amount of detergent, then add warm water and shake it evenly. .
2. Start the range hood and use a plastic bottle full of detergent to spray the cleaning solution toward the part to be washed. At this time, it can be seen that the oil and dirty water flow into the oil storage container and fall down.
3. After the cleaning solution in the bottle is used up, preparation is continued and the cleaning is repeated. Until the dirty water that flows out becomes clear, depending on the degree of fouling, it can be washed after 3 times of cleaning.
4. If the net is fitted with a net cover, it is advisable to remove the net cover first to enhance the washing effect.
5. Wipe the area around the suction port, the surface of the housing, and the lamp shade with a rag.
Hood cleaning tips
Ways to Prevent Oil Pollution in Kitchen Gas Pipelines
Building users who use pipeline gas will encounter this situation: The oil adhering to the gas pipeline is both thick and difficult to remove. A precautionary approach is now introduced: First, a thorough removal of the oil from the gas pipe is carried out, then the paper (5 cm) cut from the waste calendar is about the width of the paper and it is wrapped around the gas pipe. This is not only beautiful, but also It is also very convenient to exchange the dirty paper.
Kitchen cooker hood degreasing method
After the hood is used, the oil basin should be cleaned, and the plastic bag with sweet orange can be put into the oil box, and the box wall can be tightly attached. When the oil in the box is full, remove the full oil bag and replace it with a new one. This will not only solve the oil company's troubles, but also use waste plastic bags, saving time.
The exhaust oil in the hood oil box is available
In many home kitchens, range hoods are used today, and their oil tanks are filled with waste oil within a few days. Use it to remove stains from kitchen windows, ventilation fans, and range hoods. This is the best “tank oilâ€. The specific method: use a rag or broken towel in the waste oil and apply it to the oily place, wipe the oil with a cloth, and then wipe it with a clean cloth. Thick oily objects can be first soaked with waste oil for a few seconds. After the oil is softened, it can be wiped off with a cloth (especially thick ones must be scraped with a thin bamboo plate.)
The oil in the cooker hood can be used. Doors and windows are all connected with iron hinges, and the wear of the hinges is often very severe. The waste oil can be used on the hinge shaft with a small wooden stick to prolong the life of the hinges and reduce the noise.
Cleaning hood hood with tips
After the oil in the oil sump of the cooker hood is filled with oil, grease stains adhering to the bottom of the box and the four walls are difficult to remove. After each cleaning, sprinkle a layer of washing powder on the bottom of the box. Water, oil is lighter than water, and when it accumulates, it floats on the water. When the oil in the box is poured out after cleaning, the bottom of the box will not have grease adherence. It is easy to clean with detergent.
Gas stove cleaning method around tiles
The white tiles around the gas stove are easily contaminated by oil splash smoke and are not easy to wipe clean. According to a friend’s advice, the color plastic film used in calendars that were not used last year can be pasted on the tiles with goldfish detergent and can be saved. Wipe the time, but also according to your favorite pattern, changed every few months.
Kitchen Home Maintenance Tile Range Hood Window Kitchen Tile ld Tile
Travel Motor
This column mainly shows the excavator Travel motor parts.
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel motor, Travel Gearbox, Swing Device , Swing Motor ,Swing Gearbox,hydraulic pump, main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
Travel Motor,Hydraulic Travel Motor,Excavator Final Drive Motor,Hydraulic Final Drive Motor
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.jhexcavator.com