When we buy a house, we will inevitably think of buying a second-hand house. The second-hand house is also very good. For the decoration of the bathroom, I think everyone should feel very tricky. Xiaobian is not very familiar with the bathroom facilities and decoration. Today we are together. To solve this problem, the next small series will take everyone to come to understand the exciting content of the second-hand bathroom renovation .
First, the second-hand room bathroom renovation needs a reasonable layout
The second-hand house toilets are generally narrow. When the renovation, it is necessary to rationally arrange the second-hand bathroom and make full use of the bathroom space. Such as bathroom sinks, toilets, lockers, bathrooms, etc., these equipment should be arranged in a small area. The general arrangement method is from high to low setting, starting from the bathroom door and gradually deepening.
Among them, the most ideal layout is that the sink is facing the bathroom door, and the toilet is close to the side, and the shower is placed at the innermost end. This is the most scientific in terms of use, function and aesthetics. Renovation Home Network Xiaobian reminder: If you choose the layout of the wet and dry partition, then you must separate the basin, toilet and passage from the bathing area, and arrange the position of the basin and toilet properly under the premise of ensuring the passage.
Second, second-hand room bathroom leak test before renovation
Before the renovation of the second-hand bathroom, the toilet should be tested for water storage and leak testing for 24 hours to 48 hours. The specific method is to first block the floor drain, put about 5 cm of water to test, check how the original waterproof project is done, if there is no water leakage, it proves that the waterproof treatment is done very well; if there is water leakage, it must be done again. Waterproof treatment, after the waterproof treatment, wait until the ground is completely dry, then lay the tiles and carry out the overall decoration.
Moreover, it is necessary to treat the waterproofing of the toilet seat at the position of the toilet when the toilet is changed. When designing and decorating the top of the bathroom, it should be convenient to disassemble and facilitate future inspection and maintenance.
Third, second-hand house bathroom decoration why do waterproof?
Under normal circumstances, the old house renovation time is too long, the waterproof treatment measures at that time, in most cases, the work is done, and the time has passed so long, it is more likely to go wrong, therefore, before the renovation, we must ask the decoration master The toilet is tested for water seepage. If water seepage occurs, it is necessary to highlight the water seepage point for key waterproof treatment. If it does not seep water, it is better to carry out general waterproof treatment.
Fourth, second-hand housing bathroom renovation secondary waterproof process need to pay attention to what problems?
1, try not to damage the original waterproof layer
The decoration will add some bathing facilities in the second-hand bathroom and re-layout or move a variety of water and sewage pipelines. It has seriously damaged the original waterproof layer of the building, but it has not been repaired or re-waterproofed, so that it happens. The problem was discovered after the leak.
2, resurfacing the floor tiles to do ground waterproofing
If you need to replace the original floor tiles of the second-hand house bathroom, after the original floor tiles are cut, you must first level the floor with cement mortar and then do waterproof treatment, so as to avoid leakage of the waterproof coating due to uneven thickness. Before doing waterproofing, be sure to clean the floor and apply it repeatedly with polyurethane waterproof coating for 2 to 3 times.
3, the wall must be waterproof
When the second-hand bathroom is bathed, the water will splash on the adjacent wall. If there is no waterproof layer protection, the partition wall and the opposite corner wall will be mild and mildewed. Therefore, be sure to waterproof the wall before laying the wall tiles. Generally, the wall surface should be waterproofed to a height of 30 cm, but the non-load-bearing light-weight wall should be waterproofed, at least 1.8 m high.
The above content is the introduction of the relevant content of the second-hand bathroom renovation. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Well, today's introduction to the second-hand bathroom renovation is here. Thanks to the readers for reading this article and the support and love for Xiaobian. If you want to get more home decoration information, please continue to pay attention to the decoration. Home network.
More related wonderful reading:
How much does it cost to decorate the bathroom?
What are the bathroom ceiling materials? How to choose the ceiling material?
Advantages and Disadvantages of Precautions between Bathroom Decoration Models
Rural style bathroom decoration method, rural style features
Is the bathroom decoration ceiling good? Bathroom decoration ceiling steps
Kitchen bathroom design points bathroom decoration precautions
bbq grill, bbq grill mesh, Grill Grate, stainless wire bbq grill,Bbq Grill Metal Mesh,etc. It is suitable for indoor and outdoor barbecue.
Barbecue wire grill grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Barbecue wire grill grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
bbq grill mesh,stainless wire bbq grill,Bbq Grill Metal Mesh,cooking grate,bbq grill grates stainless steel
Shenzhen Lanejoy Technology Co.,LTD , https://www.bbq-grillgrate.com