1. Clean the construction site and remove all the tools and materials except the benches and ladders. The paint must be completed before the latex paint;
2. The hardware such as door locks and hinges should be protected; if there is a need for color change, they should be separated by color separation paper;
3, nail holes with oil putty (do not use transparent wool), especially rough decorative panels (black walnuts, teak, oak, etc.) to be full of putty again, dry and then grinding 280 water sandpaper again;
4. Apply primer 2 times and dry 400 water sandpaper again;
5, and then two times on the primer, dry with water mill No. 600 water sandpaper again;
6, then paint it again, after drying with water mill 1000 water sandpaper again;
7, then paint it again, after drying with Shuimo 1200 water sandpaper again;
8, then paint it again, after drying with a fine cotton yarn polishing again, strictly prohibited;
9, the above work must be closed tight doors and windows, clean the ground at any time, the paint work needs a clean environment, otherwise it is difficult to do a good job.
Second, mixed water paint:
1. Clean the construction site and remove all the tools and materials except the benches and ladders. The paint must be completed before the latex paint;
2. The hardware such as door locks and hinges should be protected; if there is a need for color change, they should be separated by color separation paper;
3, wood products lined edge of wood products, for woodworking when the lines and panels open between the "V" slot, painters to "V" slot with putty or self-adjusting putty fill, so there will be no cracking With obvious traces of lines, the woodwork looks like a whole;
4, putty with putty or self-adjusting Putty 2-3 times leveling, it is recommended not to use plastic putty, colloidal shelling is very likely;
5. Apply primer 2 times and dry 400 water sandpaper again;
6, again on the primer twice, after drying with water mill No. 600 water sandpaper again;
7, then paint it again, after drying with water mill 1000 water sandpaper again;
8, then paint it again, after drying with Shuimo 1200 water sandpaper;
9, then paint it again, after drying, polishing with fine cotton yarn is strictly prohibited;
10, the above work must be closed tight doors and windows, clean the ground at any time, paint work requires a clean environment, otherwise it is difficult to do a good job.
Three trees paint paint latex paint windows
Thermostatic shower faucet becomes more and more popular now. The thermostatic core maintain the temperature at 38°C (100°F), avoiding water temperature getting too cold or too hot suddenly,eliminating scalding.
Thermostatic shower faucet have different functions for options, rain shower, handheld shower, sliding bar, tub spout etc.
Different style , different materials and different finish can satisfied with all your requirement. Pls feel free to contact us for further information.
Thermostatic Shower Faucet,Constant Temperature Shower Faucet,Thermostatic Water Faucet,Temp Control Shower Faucet
Kecheng Trading Company Limited , https://www.jmttl.com