NPT is the abbreviation of National (American) Pipe Thread, which belongs to the US standard 60 degree taper pipe thread and is used in North America. National standards can be found in GB/T12716.
PT is the abbreviation of Pipe Thread, which is a 55 degree sealed conical pipe thread. It belongs to the Wyeth thread family and is used in Europe and Commonwealth countries. Commonly used in the water and gas pipe industry, the taper is 1:16. National standards can be found in GB/T7306.
G is a 55 degree non-threaded sealed pipe thread, belonging to the Wyeth thread family. Marked as G for cylindrical thread. National standards can be found in GB/T7307.
In addition, the 1/4, 1/2, 1/8 mark in the thread refers to the diameter of the thread size, in inches. Insiders usually use the points to refer to the thread size, one is equal to 8 points, 1/4 is 2 points, and so on.
G is the general name of the pipe thread (Guan), the division of 55, 60 degrees is functional, commonly known as the pipe circle. That is, the thread is machined from a cylindrical surface.
ZG is commonly known as a pipe cone, that is, the thread is machined from a conical surface. The general water pipe joints are like this, and the national standard is labeled Rc.
Metric threads are expressed in terms of pitch, and US and British threads are expressed in terms of the number of threads per inch, which is the biggest difference.
The metric thread is a 60-degree equilateral tooth type, the inch thread is an isosceles 55-degree tooth type, and the US thread is 60 degrees.
Metric threads are in metric units, and US and UK threads are in imperial units.
The pipe thread is mainly used for the connection of the pipe, and the inner and outer threads are closely matched, and there are two kinds of straight pipe and tapered pipe. The nominal diameter refers to the diameter of the pipe to be connected, and it is obvious that the diameter of the thread is larger than the nominal diameter. 1/4, 1/2, 1/8 are the nominal diameter of the inch thread in inches.
Thread angle: metric and American threads are 60 degrees, inch is 55 degrees, TM pipe thread is 30 degrees, SM needle thread and BC thread are also 60 degrees, metric trapezoidal thread 30 degrees, inch trapezoidal thread 29 degrees, table thread (TW29 degree TR and TM30 degrees).
Ordinary thread: metric thread M; inch system W; US UNC, UNE, UNEF
Pipe thread: inch PS, PT, PF; US NPS, NPT, NPTF, NPSM
Wind nozzle thread: CTV, TV 1/4-20 outer diameter size is 1A: 0.2367-0.2489 (6.012-6.322); 2A: 0.2408-0.2489 (6.116-6.322) 3A: 0.2419-0.2500 (6.1443-6.350).
Inch thread: Specifications are made according to nominal size and number of teeth per inch
Such as 1/4"-20,3/4"-10, 1"-8, 1/4"-20 means the nominal size 1/4, that is, the large diameter is 6.35mm (25.4 divided 4=6.35), 20 teeth per inch, So on and so forth.
NPT thread size
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Uv Grow Light,Uv Light For Plants,Uv Lamp For Plants,Uv Grow Lights For Plants
Feton Corporation , https://www.ultraplantgrowlights.com