The tester is produced after a lot of improvements on the basis of the original similar products. The AC-DC high-voltage test transformer is a new type of product that has been improved on the basis of the test transformer. The series of high-pressure tester products have the characteristics of small size, light weight, compact structure, complete functions, strong versatility and easy use. Especially suitable for power system, industrial and mining enterprises, research departments and other high voltage electrical equipment, electrical components, insulation materials under high frequency or DC high voltage insulation strength test. It is an indispensable and important equipment in high pressure test.
Test Transformer Operation Step 1 Connect the leads according to the wiring diagram, and ground the transformer and control box reliably.
2 Before the test, check whether the wiring of each part is in good contact, and check whether the voltage regulator of the control box is adjusted to "zero";
3 Turn on the power and the green indicator lights. Press the start button, the red indicator light, indicating that the transformer has power, waiting for boost;
4 Pressurize and rotate the regulator handle clockwise and at a constant speed. And pay close attention to the instrument instructions and the status of the sample;
5 After the test is completed, the voltage should be quickly reduced to zero, and press the stop button, then cut off the power and untwist the test leads.
Test transformer use environment requirements
1.1 input voltage: AC 220V or 380V50Hz
1.2 ambient temperature: -40 °C ~ 40 °C;
1.3 Relative humidity: ≤85% when the ambient temperature is 25°C)
1.4 In an environment that does not contain chemical gases and vapors;
1.5 No explosive dangerous gas;
1.6 Under the place where rain does not infiltrate.
Test Transformer Operation Step 1 Connect the leads according to the wiring diagram, and ground the transformer and control box reliably.
2 Before the test, check whether the wiring of each part is in good contact, and check whether the voltage regulator of the control box is adjusted to "zero";
3 Turn on the power and the green indicator lights. Press the start button, the red indicator light, indicating that the transformer has power, waiting for boost;
4 Pressurize and rotate the regulator handle clockwise and at a constant speed. And pay close attention to the instrument instructions and the status of the sample;
5 After the test is completed, the voltage should be quickly reduced to zero, and press the stop button, then cut off the power and untwist the test leads.
Test transformer use environment requirements
1.1 input voltage: AC 220V or 380V50Hz
1.2 ambient temperature: -40 °C ~ 40 °C;
1.3 Relative humidity: ≤85% when the ambient temperature is 25°C)
1.4 In an environment that does not contain chemical gases and vapors;
1.5 No explosive dangerous gas;
1.6 Under the place where rain does not infiltrate.
Shower sliding bar set is a simple style for shower. You can adjust the height and angle of the handheld shower according to your height to get the best shower experience. Simple structure allows quick and easy installation.
Different style , different materials and different finish can satisfied with all your requirement. Pls feel free to contact us for further information.
Shower Sliding Bar,Universal Shower Slide Bar,Black Shower Slide Bar,Bathroom Shower Slide Bar
Kecheng Trading Company Limited , https://www.jmttl.com