How to carry out the maintenance of the roller in the conveyor: only for light loads, for heavy duty or conveyor belts that need to be started frequently, it needs to be driven by chain or sprocket, if necessary, double sprocket drive, and 10,000 To the coupling, the bevel gear. The conveying roller is suitable for the conveying of articles with a flat bottom, and is mainly composed of a drum fitting part such as a conveying drum, a frame, a bracket and a driving part. It has the characteristics of large conveying capacity, fast speed and light operation, and can realize multi-variety collinear split conveying.
Under normal circumstances, the electric drum should be serviced once a year. The maintenance steps are as follows:
First, the lubricating oil in the drum is discharged through the oil drain hole on the left end cover of the drum.
Second, the drum is disassembled, the steps are: remove the left flange shaft end junction box and the left and left end cap bolts, then remove the right end cap bolt and the right bracket, and lift the right flange shaft with the lifting ring Can be hanged.
Third, clean the parts and their inner walls in the drum.
Fourth, re-inject a sufficient amount of calcium-sodium-based grease for each bearing (including six motor bearings).
5. Replace the seals and oil seals on the motor and the drum body. The seals and oil seals to be replaced must be intact, smooth and round, without tiny protrusions and depressions, or wrinkles. The material must be oil-resistant rubber.
Shouda roller manufacturers sincerely welcome friends from all walks of life to continue to care for the development of the first roller, field inspection and business negotiations, work together with us, common development, create brilliant! Roller http://
HDPE drainage board drain sheet
The plastic HDPE drainage board is a type of green roof systems which are drained by a special molding plastic sheets. Water is retained within dimple on the upper sides of the drainage plates; excess water spills over the edges of the plates and is carried off the roof.
The drainage board are made from HDPE(high-density polyethylene), using high pressure to inject plastic to form hole-lump-shaped shell, with stereo space and support level; in the top of the shell, covering with non-woven as filtering level for water percolation, water storage and water drainage.
Part one: Description of waterproof drainage board
Drainage materials
1, Tianhai drainage board is produced from HDPE with high impact resistance and pressure resistance, can resist long-term high pressure, and will not generate deformation.
2,The long-term pressure resistance not only can resist weight of concrete bottom plate and its load, but also can bear unavoidable outside pressure and impact force during construction, for example, vehicle, worker stepping, concrete pouring impact force, etc. 3, Drainage protection board integrates waterproof and drainage, solves relation between waterproof and drainage successfully, and is better and more reliable than traditional stone pottery particle drainage and other filter layers both in drainage function and economic benefit.
4,It can keep bottom plate no deformation for long term, so original drainage quantity can be kept. Application of filter layer earthwork fabric on bottom plate is to ensure drainage channel isn`t blocked by foreign object, for example, backfilling particle or concrete.
5,It is widely used in waterproof and drainage of roof garden, outdoor garage top plate
Part Two: The Specification of waterproof drainage board
Sheet material could be HDPE , thickness from 0.6mm to 1.5 mm, dimple height: 6mm,8mm,12mm ,16mm ,20mm, width from 2m to 3m ,composite layer is Non Woven Geotextile , length could be made according to client's request.
|
Number |
Item Name |
|
||||||
|
1 |
Material Type |
HDPE |
HDPE |
HDPE |
HDPE |
HDPE |
HDPE |
HDPE |
|
2 |
HDPE Average Thickness (mm)≥ |
0.50 |
0.70 |
0.80 |
1.00 |
1.20 |
1.50 |
1.8 |
|
3 |
Weight (g/m2)≥ |
650 |
850 |
1000 |
1200 |
1250 |
1350 |
2000 |
|
4 |
Sheet Thickness (mm) |
6mm,8mm,10mm |
6mm,8mm,10mm,12mm,20mm |
|||||
|
5 |
Roll (Width x Length) |
3mX20m |
3mX20m |
3mX20m |
3mX20m |
3mX15m |
3mX15m |
|
|
Number |
Item Name |
|
|
|
|
1.0/12mm |
|
|
|
1 |
Unit Weight g/m2 ≥ |
650 |
700 |
800 |
1000 |
1200 |
1400 |
2000 |
|
2 |
Max Tensile Strength N/10cm ≥ |
350 |
450 |
550 |
600 |
600 |
600 |
/ |
|
3 |
Compressive Load KPa ≥ |
200 |
300 |
300 |
300 |
300 |
300 |
350 |
|
4 |
Elongation at Crack % |
25 |
25 |
30 |
40 |
40 |
40 |
|
|
5 |
Longitudinal Flow Capacity cm3/cm s ≥ |
5.60 |
5.60 |
7.20 |
7.20 |
10.0 |
12.5 |
21.5 |
|
6 |
Puncture Strength N ≥ |
300 |
320 |
350 |
400 |
400 |
400 |
/ |
Part Three: The Application of drainage board
1.Waterproofing and drainage: form a channel, which water and gas can go through
2.Sound insulation and vibration isolation
3.Chemical resistance ,resist to plant' root
4.Easy for construction
5.Long lifetime
Part Four: The Packaging of HDPE Geomembrane
Export package or as customers' requests
Part Five: Certification
ISO9001:2000 International Quality System Certification,
ISO14001:2004 Environment Management System Certification GB/T28001:2001 Vocational Health and Safety System Certification. Besides, our company has successfully passed on-site check on production license, and has gained "National Industrial Product Production License" and water-proof qualification. We have been the member of Chinese Technical Association on Geosynthetics and have been recognized as a "Provincial-level Enterprise Abiding by The Contract, Keeping Promise" for several successive years and so on.
Part Six: Contact
Drainage Sheet,Hdpe Sheets For Aquaculture Pond,Pvc Drainage Sheet,Hdpe Drainage Board Sheet
Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com