Many people have a unique love for old Ming and Qing Dynasties furniture, but the old Ming and Qing Dynasties furniture is old furniture, after all, how to preserve without damage is a problem worthy of study. And there are a lot of antique furniture on the market, claiming to be old Ming and Qing furniture, and some of them even buried in the ground for a period of time to carry out corruption, doing quite realistic, as the lover of the old Ming and Qing furniture must improve the discernment. So, how to maintain and identify the old Ming and Qing furniture ? Let Omido Xiaobian tell you.
How to maintain the old Ming and Qing furniture?
1. Appearance should be smooth, smooth and delicate. Always dust, polish, and keep furniture neat and tidy. Usually remove the dust and greasy furniture, it is best to brush with a light brush, then clean with a soft cloth with a suitable temperature and a suitable dry cloth. Or wash with water-based or oily cleaners.
2. The furniture should be handled carefully and gently. In use, avoid sharp objects and hard objects. The feet of the furniture should be nailed with rubber pads to prevent damage when moving back and forth.
3. Cool or overheated things must not be placed directly on the desktop.
4. Due to the material, wooden furniture may cause damage to the material due to excessive sunlight or moisture, causing cracks in the wood, or being easily broken. Humidity has a great influence on wooden furniture and must be stored in good condition. In the dry climate, the indoor must maintain a certain humidity; in the rainy season, it is necessary to open the window for ventilation.
5. Waxing maintenance should pay attention to after the dust is removed, otherwise it will generate wax spots and cause wear and scratches. General spray wax, water wax, light wax can be, but avoid using car wax. When waxing, it is necessary to go from shallow to deep and from the point to the face.
Old Ming and Qing Dynasty Furniture and Antique Identification
1, see whether the pulp is natural
Naturally formed padding occurs in places where the user's hands often touch. The new imitation patina is usually unnatural, or it has been padded in places where it is not often touched.
2, see the traces of legs and feet
Pay attention to signs of fading and dampness. Especially in wet areas in the south, furniture is usually placed directly on the mud. This can happen when the furniture legs are long.
3, see the floor and the drawer board
For example, old desks and stuffy cabinets, there is a new imitation of the old gas on the floor and the drawer board. The old goods are also painted with matt black paint, but there is absolutely no anger. Then look at the drawer side plate, there should be a chamfer on the side to avoid hurting the hand. Another point is very important - look at the bright eyes, the blink of the past is square, and the pin is the pinnacle. If you see a blink of an eye, it means machining. In all likelihood, it is a new imitation.
4, see the wood grain
Some furniture surface will appear uneven wood grain, need to carefully observe whether the hard brush with a wire brush, is consistent with the original wood. There is always an unnatural feeling in the new imitation hard-wiping wood.
5, see the traces of revision
There are some cloth chairs in the old furniture. After the renovation, the original chair ring will leave dense nails. This kind of chair is old furniture. Some rattan chairs, the original rattan surface is rotten, will leave the eyes wearing rattan, turn over can see.
6, see copper live
If the copper furniture of the old furniture is original, it should be hand-carried for decades or even centuries. Copper jobs include face pages, hinges, hinges, handles, wrap angles, inserts, locks, etc. Some of the better materials will also be made of white copper. A long time will reveal a faint silver glow. . Some copper jobs will have a variety of motifs, including animals, flowers, and auspicious characters. The craftsmanship is very difficult for today's coppersmiths to imitate. Some very interesting folk motifs, you can also distinguish between the local customs and style of the times, so as to obtain valuable cultural information.
Some copper jobs are too long. Although they are not covered with pulp, they leave traces of rust, rust, or rust on the surface. These are the keys to identifying the authenticity of old furniture. one.
7, see the sculpture
Examine the style and the level of sculpture. In the past, when furniture was produced, the workmanship was relatively wide. The craftsman's mentality was also quite calm, carved, and rounded. Nowadays, in order to reduce costs, newly-imitation furniture tends to be in a hurry, and it will show its feet in carving. The circle is not smooth enough and the party is not strong enough.
Because of love, so when you meet a good old Ming and Qing furniture, we must also be calm and careful identification, to prevent the wrong buy, how to maintain and identify the old Ming and Qing furniture introduced finished, want to know more about the furniture, please pay attention to GO good home information Channel.
related articles
Ming and Qing Dynasty mahogany furniture authenticity method Ming Tang mahogany furniture teach you method
Ming and Qing mahogany furniture pictures
High-Power Camping Lamp,High Power Lantern,High Lumen Camping Lantern,Bright Camping Light
Land of Lights Electric Appliance Co., LTD , https://www.loloutdoorlight.com