First, buy real solid wood furniture: First of all, we must first judge whether solid wood furniture is really made of solid wood
Whether it is real wood can be seen from the three aspects of knots, wood grain and cross section.
Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side.
Wood grain: The appearance looks like a pattern, so the position of the pattern changes accordingly, and the corresponding pattern is seen on the back side. If the correspondence is very good, it is pure solid wood.
Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood.
Second, buy real solid wood furniture: look at the tree species
Look at the tree species: What kind of wood is made of wood, which directly affects the price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine wood, in addition to environmental protection, performance is much worse than the artificial board.
Third, buy real solid wood furniture: judge the origin of solid wood furniture manufacturers
Judging the origin of solid wood furniture manufacturers: pay special attention to the origin of solid wood bed wood manufacturers. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood bed produced in the south to the north, it will be susceptible to cracking and deformation due to the moisture content of the climate. Therefore, when you purchase, you should see the place of production.
Fourth, buy real solid wood furniture: observe the wood with or without defects
Observe the wood with or without defects: several major defects of solid wood: cracking, crusting, insect eyes, mildew. Pay close attention to the details when purchasing.
Cracking: Naturally can't buy.
Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought.
Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, there are so many furniture factories, the state management is so weak, and the credibility must be at least 50%. In addition to those Western-style solid wood beds, deliberately engraved on the wormhole, the other should not buy.
Mildew: It is the fact that the wood is green and has water marks. Although the sales aunt will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? The mildewed wood has a different performance than before.
Fifth, the choice of real solid wood home has the skill: to see the connection of various parts of the furniture
Look at the connection of various parts of the furniture: good solid wood furniture, are connected by means of gutters, etc., where the local load is relatively large, it is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, then the solidity of these solid wood beds is not high. For example: to judge the firmness of the solid wood bed, you can judge by shaking the solid wood bed to feel its stability.
Sixth, the purchase of real solid wood furniture: look at the quality of paint on the surface of solid wood furniture <br> See the quality of paint on the surface of solid wood furniture: the most fear of solid wood furniture is water and fire. Needless to say, there is an old saying about the fear of water: dry millennium, wet millennium, dry and wet and wet. It is about the fear of water in solid wood. The surface of the solid wood bed is especially the most effective way to prevent moisture from invading the solid wood bed. So look carefully at the solid wood bed for any areas that have not been painted.
Source: GO Jiaju Furniture Network
Hengxin Huadian Furniture teaches you to buy real solid wood furniture
Source: GO Jiaju Information | 2016-11-26 11:05:41 I want to share:
Solid wood furniture is widely loved by furniture consumers because of its natural environmental protection and long service life. However, the number of solid wood furniture on the market is increasing. It is not a simple matter to buy real solid wood furniture. Below, Hengxin Huadian Furniture teaches you how to buy real solid wood furniture.
First, buy real solid wood furniture: First of all, we must first judge whether solid wood furniture is really made of solid wood
Whether it is real wood can be seen from the three aspects of knots, wood grain and cross section.
Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side.
Wood grain: The appearance looks like a pattern, so the position of the pattern changes accordingly, and the corresponding pattern is seen on the back side. If the correspondence is very good, it is pure solid wood.
Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood.
Second, buy real solid wood furniture: look at the tree species
Look at the tree species: What kind of wood is made of wood, which directly affects the price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine wood, in addition to environmental protection, performance is much worse than the artificial board.
Third, buy real solid wood furniture: judge the origin of solid wood furniture manufacturers
Judging the origin of solid wood furniture manufacturers: pay special attention to the origin of solid wood bed wood manufacturers. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood bed produced in the south to the north, it will be susceptible to cracking and deformation due to the moisture content of the climate. Therefore, when you purchase, you should see the place of production.
Fourth, buy real solid wood furniture: observe the wood with or without defects
Observe the wood with or without defects: several major defects of solid wood: cracking, crusting, insect eyes, mildew. Pay close attention to the details when purchasing.
Cracking: Naturally can't buy.
Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought.
Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, there are so many furniture factories, the state management is so weak, and the credibility must be at least 50%. In addition to those Western-style solid wood beds, deliberately engraved on the wormhole, the other should not buy.
Mildew: It is the fact that the wood is green and has water marks. Although the sales aunt will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? The mildewed wood has a different performance than before.
Fifth, the choice of real solid wood home has the skill: to see the connection of various parts of the furniture
Look at the connection of various parts of the furniture: good solid wood furniture, are connected by means of gutters, etc., where the local load is relatively large, it is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, then the solidity of these solid wood beds is not high. For example: to judge the firmness of the solid wood bed, you can judge by shaking the solid wood bed to feel its stability.
Sixth, the purchase of real solid wood furniture: look at the quality of paint on the surface of solid wood furniture <br> See the quality of paint on the surface of solid wood furniture: the most fear of solid wood furniture is water and fire. Needless to say, there is an old saying about the fear of water: dry millennium, wet millennium, dry and wet and wet. It is about the fear of water in solid wood. The surface of the solid wood bed is especially the most effective way to prevent moisture from invading the solid wood bed. So look carefully at the solid wood bed for any areas that have not been painted.
Source: GO Jiaju Furniture Network
Related articles recommended
Hengxin Huadian Furniture teaches you to buy real solid wood furniture
What are the factors that affect the value of solid wood furniture? Hengxin Huadian tells you
First, buy real solid wood furniture: First of all, we must first judge whether solid wood furniture is really made of solid wood
Whether it is real wood can be seen from the three aspects of knots, wood grain and cross section.
Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side.
Wood grain: The appearance looks like a pattern, so the position of the pattern changes accordingly, and the corresponding pattern is seen on the back side. If the correspondence is very good, it is pure solid wood.
Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood.
Second, buy real solid wood furniture: look at the tree species
Look at the tree species: What kind of wood is made of wood, which directly affects the price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine wood, in addition to environmental protection, performance is much worse than the artificial board.
Third, buy real solid wood furniture: judge the origin of solid wood furniture manufacturers
Judging the origin of solid wood furniture manufacturers: pay special attention to the origin of solid wood bed wood manufacturers. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood bed produced in the south to the north, it will be susceptible to cracking and deformation due to the moisture content of the climate. Therefore, when you purchase, you should see the place of production.
Fourth, buy real solid wood furniture: observe the wood with or without defects
Observe the wood with or without defects: several major defects of solid wood: cracking, crusting, insect eyes, mildew. Pay close attention to the details when purchasing.
Cracking: Naturally can't buy.
Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought.
Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, there are so many furniture factories, the state management is so weak, and the credibility must be at least 50%. In addition to those Western-style solid wood beds, deliberately engraved on the wormhole, the other should not buy.
Mildew: It is the fact that the wood is green and has water marks. Although the sales aunt will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? The mildewed wood has a different performance than before.
Fifth, the choice of real solid wood home has the skill: to see the connection of various parts of the furniture
Look at the connection of various parts of the furniture: good solid wood furniture, are connected by means of gutters, etc., where the local load is relatively large, it is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, then the solidity of these solid wood beds is not high. For example: to judge the firmness of the solid wood bed, you can judge by shaking the solid wood bed to feel its stability.
Sixth, the purchase of real solid wood furniture: look at the quality of paint on the surface of solid wood furniture <br> See the quality of paint on the surface of solid wood furniture: the most fear of solid wood furniture is water and fire. Needless to say, there is an old saying about the fear of water: dry millennium, wet millennium, dry and wet and wet. It is about the fear of water in solid wood. The surface of the solid wood bed is especially the most effective way to prevent moisture from invading the solid wood bed. So look carefully at the solid wood bed for any areas that have not been painted.
Source: GO Jiaju Furniture Network
HDPE Smooth Geomembrane is one double-surface membrane with flat and smooth appearance made from virgin resin with special formula. We can produce Hdpe Geomembrane, LLDPE Geomembrane, LDPE geomembrane etc. HDPE glossy geomembrane has excellent impermeable and antifouling property and mechanical property; dimensional stability, chemical stability, thermal resistance and aging resistance are good; in the meantime, it also has excellent resistance to UV radiation.
The Application of HDPE geomembrane
1) Environmental protection sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) .
2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.).
3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.).
4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.).
5) Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.).
6) Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.)
HDPE geomembrane technical index of ASTM test GM 13 standard
No.
Item
Test Value
0.75
1.0
1.25
1.5
2.0
2.5
3.0
1
Minimum Density(g/cm³)
0.939
2
Tensile Property
Strength at yield,N/mm
11
15
18
22
29
37
44
Strength at break ,N/mm
20
27
33
40
53
67
80
Elongation at yield,%
12
Elongation at break,%
700
3
Tear Resistance N
93
125
156
187
249
311
374
4
Puncture Resistance N
240
320
400
480
640
800
960
5
Stress Crack Resistance, hrs
300
6
Carbon Black Content, %
2.0-3.0
Carbon Black Dispersion
1 or 2
7
Standard OTI Min
100
High Pressure OTI Min
400
8
Impact Cold Crack at -70°C
Pass
9
Water vapor permeability
(g.cm/cm2 .s.Pa)
≤1.0×10-13
10
Dimensional Stability (%)
±2
Certification

Smooth Geomembrane
Smooth Geomembrane,Smooth Surface Hdpe Geomembrane,Plastic Film Geomembrane,Anti-Seepage Hdpe Geomembrane
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com