ã€China Aluminum Industry Network】 At present, there are three energy-saving doors and windows that are mainly used in the market. They are: plastic doors and windows, wear-in-insulation aluminum alloy doors and windows, and plastic insulated aluminum alloy doors and windows. In fact, these three kinds of doors and windows have some common advantages and some of their own characteristics.
Insulation performance: Generally determined by the K value of the thermal conductivity of the material itself. The thermal conductivity of plastic profiles (PVC) K (W/m2K) value is 0.16; thermal insulation strips in insulating strips made of heat-insulating strips of glass fiber reinforced PA66 K value of the material is 0.26-0.34; plastic injection type aluminum insulation The K value of the heat-insulating glue is 0.008-0.13. From the K value of thermal conductivity of thermal insulation materials, thermal insulation rubber is a better thermal insulation material.
The insulation performance of the windows is represented by the heat transfer coefficient U. The new current standard in Beijing specifies that the U value is 2.8 (W/m2K) (Beijing Municipal Residential Building Energy Efficiency Design Standard DBJ11-602-2006), and the new current standard of Shanghai provides U The value is 3.2 (W/m2K) (Shanghai Energy Efficiency Design Standard for Residential Buildings DG/TJ08-205-2008); the same door and window, and the glass system configuration is the same, the U value of plastic doors and windows is 2.2-2.9W/ m2K; The U-value of the strip-insulated aluminum alloy doors and windows is 2.2-2.6W/m2K, while the U-value of the plastic-insulated aluminum alloy doors and windows is smaller than that of the strip-insulated window (mainly embodied in K The value is smaller and the potting glue is solid inside the insulation tank, unlike the puncture type which is hollow between the two insulation bars, there will be air convection phenomenon). From this, it can be seen that the rubber-insulated aluminum alloy doors and windows are preferred for energy-saving doors and windows in terms of thermal insulation performance.
Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.
With its high accuracy, wide rangeability and reliable performance, Sealand meter has been applied in many kinds of industries during the last 8 years. Unlike others who only focus on the measurement of liquid at normal pressure & temperature, Sealand has conquered the difficulty in the measurement under severe conditions, such as high pressure, high viscosity, high & low temperature.
Besides, Sealand lab is
1. Controlled completely by automatic system, to minimize personal error.
2. Equipped with 3 METTLER TOLEDO scales with accuracy 0.014%.
3. Device extended uncertainty: 0.05%.
4. Certified by Zhejiang Institute of Metrology which is authorized by ILAC; Sealand meters are also approved by them after test in their lab with ISO/IEC 17025:2005 standard.
Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com