Tool tips

Purchase tools:
1. Select the two sides of the tool: flat and smooth, no forging dents.
2. The thickness of the selected blade is said to be moderate: the exposed steel is moderate, the blade is straight and not twisted, and the knife blade is straight through a black line. There is no “white edge”.
3. Knife back, cutter head, and knife heel are evenly ground. "No black exposure", no burr, no handle.
4. The handle is flat and firm, and the knife collar is not loose

Tool knowledge:
1. The cheekbones and meat should be used separately for different purposes. The cutter should not cut or cut hard objects such as metal or wood.
2. When the zygomatic bone is used, the heel of the blade should be used to contact the bone. At the same time, the edge of the cheekbone is used as the obtuse angle and the vertical knife is used. If the bone catches the edge of the blade, it should not be shaken to the left and right, pull out the edge of the blade. The correct method is to raise the bone with the knife and cut it again until the bone breaks. Otherwise, it will cause the broken edge of the steel blade into an arc-shaped gap, which is not used properly and is not covered by the warranty.
3. After each use of the knife, it must be washed, dried, and cooked with cooked cooking oil, placed in a ventilated, dry place away from water and gas cookers to prevent rust. (When the stainless steel cutter comes into contact with carbon monoxide gas, it will produce yellow spots. It should be prevented)
4. The kitchen knife, scissors, rusty, can use a piece of sweet potato to wipe several times carefully, and then wipe with a dry cloth can be, after the kitchen knife rusty, the knife in Taomi water dip for 3 hours, you can go to rust.
5. Tool water mill method: when the knife is blunt, add water to the angle of 15 ° -20 ° on the sharpening stone back and forth grinding number can be sharp

stainless steel

Grow Light Cob Waterproof

2020 hot sale 50w 100w 150w cob grow light, waterproof IP67, use Epistar 50w cob flip chip, pink lighting/3500k white lighting for you to choose.

50w 1pcs cob chip, can replace hps 300w;

100w 2pcs cob chip, can replace hps 500w;

150w 3pcs cob chip, can replace hps 1000w.


Waterproof Best Cob Led Grow Light, is your best choose for indoor plants, each lamp with bracket, easily install.

50w:

Best Cob Led Grow Light

100w:

Diy Cob Led Grow Light

150w:

566565


Cob Led Chip,Best Cob Chip,Led Cob Chip Grow Light,Cob Chip On Board Technology

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wenyigrow.com