[China Aluminum Network] 6061 aluminum alloy has the advantages of moderate strength, corrosion resistance, good processability, and strong weldability. It has been widely used in functional and structural materials. Conventional welding methods (such as MIG, TIG, etc.) are often used to weld such alloys at home and abroad, but the strength of welded joints is not enough, and welding seams are prone to defects such as gas, inclusions, and cracks. Ultrasonic welding technology can realize the connection of low-melting-point materials such as magnesium alloys and aluminum alloys, which are difficult to weld with traditional welding methods, together with outstanding advantages such as energy saving, environmental protection, and easy operation. This article will study in detail the joint microstructure, surface morphology and mechanical properties of 6061 aluminum alloy after ultrasonic welding, and obtain better process parameters for ultrasonic welding of 6061 aluminum alloy, and analyze the effect of aluminum alloy surface treatment on its welding performance. To promote the application of advanced welding technology such as ultrasonic welding in connection with lightweight alloys.
The experiment used 0.3mm thick 6061 aluminum alloy, the test piece size is 160mm × 18mm × 0.3mm. Ultrasonic metal spot welding machine is used to weld the two cut aluminum sheets. The working frequency is 20kHz, the amplitude is 35um, welding pressure and welding time are adjustable, and the welding head size is 8mm×8mm. The welding time varies from 40 to 140 ms, and the cylinder pressure varies from 0.1 to 0.6 MPa. The relationship between cylinder pressure and welding pressure is: welding pressure = (cylinder area / spot area) × cylinder pressure. In this experimental apparatus, the solder joint area is 88mm2, and the cylinder diameter is 53mm. After the conversion, the welding pressure is 35 times the cylinder pressure, so the welding pressure changes from 3.5 to 21MPa. The welding sample peel test uses the CMT2520 New SMIC microcomputer-controlled electronic tensile testing machine with a loading rate of 15 mm/min. The peel test is performed according to the structural adhesive test standard.
Without exposing screws, the die-casting aluminum of LEDER technology`s LED inground light gives it excellent heat dissipation, prolongs its lifespan, and reaches its waterproof performance up to IP68. Humanized lighting mostly installed are lawns and undergrowth to avoid shining directly into your eyes, this inground light`s COB LED chips to shine over a 60° beam angle while the optical lens keeps the lights from dazzling your eyes.
This LED inground light features the ability to adjust the direction of the light from outside the fixture - leaving the factory seal intact. Featuring a cast brass housing that sits within a heavy-duty polymetric sleeve, it also offers silicone rubber gaskets at the lens, a potted driver, and a strain relief below, all designed to prevent water ingression.
Features:
• Sealed drive
• Modern minimalist design
• Group and control multiple lights with the smart life app
• Energy saving save electricity
• water impervious
• Color temperature :3000k-6000K
• Stainless steel frame
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
You can use this light where many people gather or where many activities take place. To meet different lighting needs, this light is suitable to be installed in soil, cement, stone, wood and other environments.Outdoor Shallow Inground LED Well Light round inground fixture with stainless steel finish framework, for outdoor use.
We have rich production experience in lighting. Except LED Inground Light, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light ,LED Bollard Light ,LED Wall Washer,Outdoor Wall Light & step light as so on .
Inground Light,Inground Uplight,In Ground LED Lights,In Ground Up Lights
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , http://www.walllightindoor.com