Prevent! Six corporate security risks

Enterprise production is a dynamic process. In this process, all kinds of insecure factors can easily cause accidents, cause injury to workers' life safety and health, damage equipment and facilities, and result in normal production activities being difficult to carry out smoothly. The timely detection and elimination of insecure factors around them to avoid unsafe behavior can effectively avoid accidents.

First, personal protection is not in place

Safety helmets are not worn correctly in the work area.

No protective clothing that meets safety standards was worn in the job.

The overalls did not fit properly or were not repaired in time, and the oil stains were not cleaned in time.

When working in a designated area, do not wear safety shoes and wear slippers to enter the job site.

Multifunctional safety shoes

Shirtless work when the weather is hot.

The collar, cuffs, and trousers were not tied during work and the shoelace was not tied.

There is no safety belt during the ascent operation, no gloves are used during the assembly work, no goggles are used during grinding and gas welding, and no mask is used during the welding operation.

Wear gloves when operating the rotating machine and gloves when using the sledgehammer.

No protection against harmful light, radiation and noise.

point   Reviews

Personal protective equipment that protects workers from or reduces accidents and occupational hazards can be protected against physical and chemical hazards and can directly protect the human body, including head protection, eye protection, foot protection, hearing protection, and respiratory protection. Protection and other aspects. Employees should have a correct understanding of the role of personal protective equipment and be properly worn and used during production to obtain effective protection.

Second, bad habits

After drinking, enter the construction site or go to work.

Do not pay attention to rest at night, fatigue posts, sick jobs, with bad mood homework.

Smoking did not arrive at the designated place, and cigarettes were thrown away.

Use mobile phones in hazardous areas.

Failure to perform procedures during the shift did not explain clearly matters needing attention.

Enter other workplaces casually. When you exercise guardianship duties, you will leave the post without authorization.

No safety confirmation of the construction environment.

It's easy to save time and simplifies work procedures.

Failure to participate in safety education training on time.

point   Reviews

The power of custom is great. No habit is formed by accident, but it is a process that changes from quantity to quality. Good habits can benefit people for life, and bad habits are harmful. Many production safety accidents are caused by the bad habits of workers. Abandoning bad job habits and developing safe production habits should be a "required course" for every employee, and "go happy to come to work and go home safely."

Third, non-compliance with job discipline

Before the operation started, it was impossible to carry out safety inspections on the tools and equipment that need to be used, use tools and equipment that should not be used by oneself, use tools and equipment that had been scrapped, use tools and equipment with safety defects, and use it overloaded. Mechanical appliances.

When carrying out operations such as lifting, the attitude is arbitrary and does not obey the conductor's command. Unauthorized the removal of the safety devices on the tools used.

Transfer tools and artifacts by throwing.

During the working hours, slap and play at the workplace, and concentrate on operating machinery and equipment. Talk to people who are working.

During the crossover operation, there was no communication with other workers.

In the absence of guardianship, enter a small, confined space operation.

Feel free to touch machinery, appliances, and control switches that you are not familiar with.

Do not listen to others discourage entry into dangerous areas and ignore dangerous signs into dangerous areas. Unauthorized dismantling of the safety warning signs and unauthorized removal or addition of hanging plates.

Violation of brute construction of construction procedures, construction conditions are not mature when the construction is barely.

When accidents occurred, they gathered at the scene of the incident and blindly rescued them.

point   Reviews

All joint production processes must have a certain degree of work discipline in order to maintain order in the production process. Job discipline is both a guarantee for employees to complete their production tasks and a guarantee for their safe production. In daily operations, employees should follow the unified command, strictly abide by the requirements of job discipline, and consciously achieve safe production.

Fourth, preventive measures are not implemented

Work under low lighting conditions.

Use open flame lighting in confined areas and use lighting voltages higher than 12 volts when working inside pressure vessels .

Stay on the edge of a high place without falling protection facilities.

During the cutting of excess materials and construction at high points, no fall prevention measures were taken ; after the temporary openings and material holes were opened, no fall prevention measures were taken.

Passed under the weight of the crane and did not avoid the ground construction personnel when lifting the object.

During the rain, electric welding and gouging were performed in the open air and no electric shock prevention measures were taken ; in the sealed vessel, the welding operation was performed and no electric shock prevention measures were taken ; in the wet place, the electric welding operation was performed and no electric shock prevention measures were taken.

When assembling or adjusting a large workpiece, it is not securely fastened and the lifting work cannot be tied tightly when lifting objects.

point   Reviews

The implementation of safety precautions is an important guarantee for safe production. Enterprises should combine their own production reality, organize employees to check the risks in their operations, search for insecure elements in time, eliminate potential safety hazards, and formulate targeted preventive measures to ensure that all measures are implemented in place and effectively prevent problems. .

Fifth, the wrong operation has not been avoided

Hit the pressurized industrial gas cylinder and put the acetylene gas cylinder down.

Temporarily set up a temporary power supply line without permission, and set up a fixed lighting facility that produces non-safety voltage-powered supply.

When repairing and maintaining electrical equipment with electricity, the connection of the welding work circuit is not standardized.

During welding, the welding machine is not protected by zero, and the welding operation is performed on a small barrel container of unknown origin.

Rushly carry out welding and cutting operations on pressurized pipelines and vessels.

Gas cutting soft tape is not used according to the specified color standard.

Automatic fire without permission in the fire- fighting area ; ignorance of the situation around the work site ; arbitrarily hot work ; when there are fire or explosion factors around it, rash fire work.

The lifting operation was incomplete observation and the command signal was inaccurate. Standing on the hanging object to direct the lifting operation, overload the use of lifting equipment.

The electrical equipment did not cut off the power supply immediately after the completion of the work, and the gas welding gas cutting equipment did not shut off the air supply in time after the work was completed.

Water or foam fire extinguishers are used to fight electrical fires without power interruption.

point   Reviews

In order to ensure the safety and stability of all production activities, companies and departments often formulate specific operating rules based on the procedures and procedures that must be followed when operating equipment or conducting business. Employees should operate in accordance with the operating specifications to avoid erroneous operations leading to production safety incidents.

Six, no standard storage of goods

Where there is no clear delineation of safe passages and places for stacking items, the name and storage requirements of the items are not expressly stated.

Placing objects around fire hydrants, fire extinguishers, etc., blocking safe passages.

Store flammable and explosive substances under electrical switches.

Storing dangerous goods privately, there is no special place to store or keep dangerous goods.

Randomly place construction materials and semi-finished products and finished products.

Carts and other transport tools are free to place.

After the work at a high place is completed, articles are stored on the hanging board.

The job site was not cleared in time after the work was completed.

After the completion of the hot work industry, the remaining fires were not cleared in time.

point   Reviews

In the production process, it is necessary to continuously input raw materials and continuously produce semi-finished products and finished products. At the same time, various types of working tools are required to generate certain wastes and scraps. In order to avoid accidents, employees should promptly clean up and rectify workplaces and properly store various types of articles in order to keep the workplace safe and orderly.

The information in this article comes from the Internet and was reorganized and edited by China Rescue Equipment Network.