Porcelain tube base composite mold design

1. Processability analysis of parts Figure 1 is the porcelain tube seat on the fancy spinning machine of our factory. The material is Q235, the material thickness is 2mm, the shape of the part is not complicated, and the precision requirement is not high, so the blanking punching can be compounded. The punching die is punched out at one time. However, the long waist hole of the part is located on one side of the part, the minimum wall thickness is only 3mm (1.5t, t is the material thickness), and the pressure center deviates from the geometric center of the part, which becomes the focus of the mold design.

Outdoor LED Wall Light

We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting

Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.

While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.

Outdoor Led Wall Light,Brass Outdoor Led Wall Light,Outside Light Fixtures,Outdoor Motion Sensor Light

Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com