The other questions that should be noticed when using the magnetic pump are as follows: ①Under the normal operating conditions of the magnetic pump, there is generally no phenomenon of aging demagnetization over time. However, when the pump is overloaded, blocked, media viscosity increases or the operating temperature is higher than the allowable temperature of the cylinder, it may happen decoupling, demagnetization and so on. The magnetic pump must therefore be operated under normal operating conditions. Today's latest valid order information free to send! Morning latest buyers information free to send! Punch grab Rob here! ② For magnetic drive pumps requiring direct start, the torque capacity of the magnetic coupling should be at least 2 times the rated torque of the motor. ③ When the transmission of highly toxic or highly flammable media, in order to improve the service life and operational safety, magnetic drive pump in the isolation sleeve should be set temperature measuring instrument (RTD), the use of pressure-tight magnetic coupler box or double Isolation sleeve structure, should be set liquid leak probe. ④ stainless steel magnetic pump does not allow the transport of ferromagnetic impurities in the media. ⑤ documents provided by the seller should be increased inside and outside the cylinder demagnetization characteristics of quality documents. ⑥ The buyer should pay attention to the efficiency of the magnetic pump in the seller's data and find out whether the efficiency in the data sheet has taken into account the magnetic transmission loss or just the hydraulic efficiency.
Led Down Light,Smart Led Downlights,Led Surface Downlight,Trimless Led Downlight
OLAND PHOTOELECTRIC TECHNOLOGY CO.,LTD. , https://www.olandlights.com