Including waterways, circuits, waterproofing, balcony elevations, ceilings, guarantees, and so on, the customer, project supervisor, and construction manager will participate in the project. Acceptance of signatures will not allow construction to continue.
The hidden works in home decoration refer to the pipeline engineering and structural engineering concealed inside the decorative surface. Pipeline engineering includes electrical circuit, water supply and drainage, gas pipeline, and air conditioning system; structural engineering refers to the internal structure used to fix and support the load of the house. Although once fabulous beasts and high-tech factions exposed the structure of the pipeline as beautiful, this method is not suitable for the decoration of ordinary people.
It is worth noting that the quality of concealed works is widespread, and due to inconvenience in maintenance, many hidden dangers remain. Therefore, it is necessary to understand its structure and materials. The hidden works of home decoration mainly include six aspects:
(1) Water supply and drainage works. As the galvanized pipe is apt to rust, foul, not keep warm, and will be frozen, it will be phased out. At present, the most used are plastic aluminum composite pipes, plastic steel pipes and PPR pipes. These tubes have good plasticity and toughness, and the insulation does not crack or foul. The use of special copper joints or thermoplastic joints guarantees quality assurance and low energy consumption.
(2) Electrical pipeline engineering. General power cord is divided into hard wire, soft wire, sheathed wire, etc. According to the thickness of copper core, it is divided into 1 square millimeter line, 1.5 square millimeter line, 2.5 square millimeter line. For safety reasons, it is more convenient for maintenance and the power cord should be sleeved. In addition there are audio lines, signal lines and so on. The outlets are divided into 10A, 15A, ..., and there are also many types of brands, and many counterfeits. Poor outlets are prone to accidents, and it is recommended to purchase them in a regular electrical appliance store. Electrical wiring projects require construction regulations. Workers should hold certificates to ensure safety and eliminate hidden dangers.
(3) floor base. There are two approaches for the base of solid wood flooring: brushing cold base oil on cement floors, laying wooden keels, and finally nailing floors; another method is to lay a layer of blockboard on the keel first, or a wool floor, and then nail Floor, using this method, the floor is evenly distributed and the structure is firm. Composite floors are easy to install and there are also two ways to do this: one is to make the leveling layer first, then lay the PVC cushion, and then lay the composite floor; the other is on the cement leveling layer, laying the wooden keel and the wool floor, and the two-storey composite floor.
(4) The basement of the retaining wall and the wainscoting plate are flat and concave and convex. The practice is to brush a layer of cold base oil on the wall first, then install a 30mm*40mm wooden keel, nail the multilayer board or blockboard on this basis, and finally nail the veneer plywood. In order to prevent mildew, a series of 6mm diameter courageous holes are opened on the upper part of the visor.
(5) Window> Door and window cover base layer.The keel is arranged first, then the wood board or density board is nailed, and the surface is plywood nailed with a veneer.Note that the MDF notice should be soaked in water to avoid future expansion.
Ceiling basement. Ceiling materials are gypsum board, gray board, plywood, aluminum alloy buckle board, plastic buckle board, milled glass, stained glass, etc., keel wood keel and light steel keel. Cracking of ceilings often occurs, such as the use of elastic putty joints, and the application of nylon straps can improve this situation.
After the completion of the concealment project, it shall be checked and accepted to ensure that no hidden troubles are left. Only after passing the inspection can the follow-up construction be conducted. Otherwise, if problems are discovered in the future, they need to be reworked, which will not only affect the quality but also delay the construction period. Both the owner and the contractor will suffer losses.
Hidden project construction acceptance electrical glass socket window cement painted wall glass door
Self drilling Screw made of 410 stainless steel, high hardness (40 Rockwell C), steel process.
Drilling screw is also very strong hardness, compared to the ordinary screw up, not only to maintain the ability is good, the connection object effect is also very strong, for the performance of the screw, are generally does not need auxiliary processing, can be directly on the object directly drill a Kong Sue into objects, not just use rise very convenient, Also can greatly improve the efficiency of work. This kind of drilling screw can be said to be the first choice of workers in various fields.
So what is the use of drilling screws?
1 stainless steel plate, metal plate, galvanized steel plate, engineering installation.
2 metal curtain wall metal light compartment and other indoor and outdoor installation.
General Angle steel, channel steel, iron plate and other metal materials combined installation.
4, automobile, container, shipbuilding, refrigeration equipment and other assembly projects.
Self drilling screw,hex Self drilling screw,truss Self drilling screw,flat Self drilling screw,pan Self drilling screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com