[Floor coatings manufacturer Bayer water-based inorganic floor coatings] Floor water-based floor coatings / water-based floor coatings We ca n’t control the temperature of the construction environment. We often see regulations saying that water-based floor coatings / water-based floor coatings cannot Apply under too low or too high temperature. So what are the temperatures mentioned here?
Temperature is too low: Many two-component coatings are difficult to cure in an environment with a temperature of less than 5 degrees, or the reaction is very slow, resulting in a significant increase in film formation time, or inability to form a film. If it cannot be cured, the second process cannot be constructed. If it cannot be cured, it means that the floor cannot be completed. For example, if the coating film dries very slowly, dust and other debris can easily contaminate its surface, resulting in poor decorative effect; too slow curing will also affect the performance of the coating film, reducing its hardness and deteriorating wear resistance Affect the service life of the floor.
Excessive temperature: If the temperature is higher than 30 degrees, it will cause the consistency of the coating to increase, dry and scrap, and in serious cases, the phenomenon of explosion polymerization will occur. As a result, the workers were not able to finish the floor paint in the barrel, and the floor paint was no longer useful. Generally, we use a small number of times to match the paint, or use thinners with high boiling points and slow evaporation to adjust the humidity. The influence of the construction of water-based floor coatings / water-based floor coatings.
================================================== ================================================== ======
================================================== ================================================== ======
Steel Cable,Stainless Steel Cable,Steel Rope,Stainless Steel Wire Rope
Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.wmpallettruck.com