Gear pump start and stop

A pair of intermeshing gears and pump cylinders separate the suction chamber from the discharge chamber. When the gear rotates, the volume of the tooth between the tooth on the suction side and the tooth on the tooth side gradually increases and the pressure decreases, and the liquid enters the space between the teeth under the pressure difference. As the gear rotates, liquid between the teeth is brought to the discharge chamber. At this time, the volume between the teeth on the discharge side of the tooth on the side of the cavity is gradually reduced, and the liquid is discharged. Gear pump is suitable for conveying non-solid particles, non-corrosive, large viscosity range of lubricating liquid. Pump flow to 300 m 3 / hour, the pressure up to 3 × 107 Pa. It is commonly used as a hydraulic pump and delivery of various types of oil. Gear pump structure is simple and compact, easy to manufacture, easy maintenance, self-priming capacity, but the flow, pressure pulsation and noise. Gear pump must be equipped with safety valve to prevent for some reason, such as the exhaust pipe plugging the pump outlet pressure exceeds the allowable value to damage the pump or the prime mover 1, start: (1) before starting to check all the pipe flange, the connector Sealing. (2) Disc drive coupling, no friction and collision sound. (3) The first start should be injected into the pump liquid. (4) should be fully open before inhalation and discharge of the valve in the pipeline, closed valve is strictly prohibited to start. (5) After verifying the direction of motor rotation, start the motor. 2, parking: (1) turn off the motor. (2) Close the pump inlet and outlet valves.

Steel Nipple

nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.

The length of the nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for wrench to grasp (sometimes referred to as a "hex nipple"), or it may simply be made from a short piece of pipe (sometimes referred to as a "barrel nipple" or "pipe nipple"). A "close nipple" has no unthreaded area; when screwed tightly between two female fittings, very little of the nipple remains exposed. A close nipple can only be unscrewed by gripping one threaded end with a pipe wrench which will damage the threads and necessitate replacing the nipple, or by using a specialty tool known as a nipple wrench (or known as an internal pipe wrench) which grips the inside of the pipe, leaving the threads undamaged.

Application Areas:

·Gas Plants

·Power Plants

·Chemical Plants

·Petroleum Industry

·Metallurgy Industry

·Ship-building Industry

·Construction Industry

Grades:

·Stainless Steel: ASTM, A403, WP304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L

·Carbon Steel: ASTM, A234, WPB / A420, WPL3 / A420, WPL6 / MSS-SP-75, WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70

·Alloy Steel: ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91

·Other Metals offered for making butt weld pipe fittings: Monel, Nickle, Inconel, Hastelloy, Copper, Brass, Titanium

Nipple in good stock :

Carbon Steel Nipples

Stainless Steel Nipples

Steel Nipple Fittings

Steel Nipple

Threaded Black Nipples

Carbon Steel Nipples,Stainless Steel Nipples,Pipe Nipples,Concentric Nipple,Steel Nipple Fittings,Steel Nipple,Threaded Black Nipple,Swage Nipple

Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com