The reason why the planetary reducer cannot be started, I have summarized the above reasons:
1. Check the power supply and link line problems.
2. Check the reducer shaft to see if there are small bumps on the paint.
3. Check the motor.
During the operation of the gear reducer motor, a variety of different problems may occur. We should quickly solve these problems according to the site situation. This requires a certain amount of professional knowledge. Let ’s take a look at the planet with the technician of the planetary reducer company. Reducer can not start the problem to do a detection and analysis. So that everyone can quickly determine the faults in the operation of the planetary reducer. Analyze the reason why the planetary reducer cannot start
When you turn on the power switch one day, you find that the planetary reducer cannot run. Do n’t rush to complain about the poor quality of the reducer. First cut off the power and check whether the power is normal. The nameplate of the planetary reducer has the rated voltage of the machine. It should be checked whether the voltage at that time is normal, if it is normal, then check the target machine, that is, the equipment connected to the output shaft, you can try to rotate the shaft to see if it can rotate normally, if you can't rotate, try to separate the planetary reducer and try again Try, and then judge whether it is a problem of the reducer or a failure of the target device. During the inspection, you should pay attention to see whether the rotating shaft is abnormal, and see if there are small bumps, which will affect the work of the rotating shaft. This is due to the rupture of the paint film and some parts caused by the influence of humidity. The insulation resistance is reduced after the second drying. This will cause burnt smell of the reducer. In this case, use a shovel to shovel off the excess paint on the shaft, blow it clean, and then remove those small lumps. Although these operations are simple, but If you don't pay attention, there will be new problems.
After a variety of methods to check it is the problem of the motor, this requires a professional to detect and repair, if you can contact the after-sales during the warranty period. When detecting equipment problems, it is often caused by problems that are easily overlooked. It may be that a power cord is not connected or broken. All the steps for detecting planetary reducers should be divided into major and minor. Do n’t move and disassemble the machine. First Take a look at the simple reason why it may be a failure. Leave the disassembly machine and keep it good.
For more planetary reducer related news click: http://jaccom.cn
================================================== ================================================== ======
Loader Parts,Track Loader Parts,Case Loader Parts,Skid Loader Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsugenuineparts.com