In recent years, with the ever-increasing living standards of the people, and the fact that solid wood flooring is directly processed by mechanical processing from natural wood, it has the characteristics of natural beauty, cool in winter, cool in summer, non-toxic, good in foot, and noble, although the price However, it is more and more popular among consumers. However, there are many quality problems in the use of solid wood flooring. We analyze the causes from common problems and then apply the drugs to the problem.
Scholarly aesthetic floor   Flanner sofa
1. Cause floor distortion
Reasons: a. The wood properties of the flooring are not suitable;
b. Improper processing techniques and materials;
c. The uneven control of the moisture content of the floor or the moisture content of the floor is not suitable for the environmental requirements of the place of use.
2. Caused too much gap between floors
Reasons: a. The moisture content of the floor is too large;
b. The indoor environment is too dry;
C. The floor laying quality is not high, causing the floor to move.
3. Causes the floor to arch
Reasons: a. When the pavement is installed, the gap between the floor and the wall base is not enough;
b. Reserving gaps is not enough when there is no bridge treatment or bridge processing between rooms and rooms;
c The moisture content of the floor when laying is too low;
d. The room is leaking due to water, and the floor is soaked in water;
e. Wet ground or keel wood is wet.
4. The floor height difference is too large
Reasons: a. uneven ground;
b. The keel is uneven;
C. floor thickness deviation;
d. The floor has been deformed;
e. Floor groove processing does not match.
5. The floor appears corrugated
Reasons: a. When the floor is laid, the cement floor is uneven and the moisture content of the keel is too large;
b. The indoor environment is dry;
c Floor water content is too high;
d. The humidity in the indoor environment is too high and the moisture content on the floor is low.
6. Cracks in the floor
Reasons: a. Wood properties are not suitable for making wood floors;
b. The wooden floor has a high moisture content, the indoor environment is dry and the humidity is low.
7. Peeling, cracking, wrinkling of the paint film
Reasons: a. Paint performance is not suitable for the kind of flooring, resulting in the adhesion of the paint film and wood can not meet the requirements of use, there will be spalling phenomenon;
b. The toughness of the paint film can not meet the changes of the natural wet rising and shrinkage of the wood, resulting in cracking and wrinkling of the paint film;
C. Peeling of topcoat caused by poor adhesion of paint topcoat and primer;
d. The flaking, cracking, and wrinkling of the paint film due to unscientific paint process;
e. The wrinkling and peeling of the paint film is caused by the high water content of the floor;
f. The paint film is cracked or peeled off due to the low water content of the floor board; due to the bad indoor environment, the paint film may be damaged if the indoor environment is too dry or wet.
8. Floor discoloration
Reasons: a. The discoloration of the wood itself due to the influence of the external environment, such as sunlight, indoor air environment;
b. changes in the paint caused by the influence of the external environment;
C. Changes resulting from chemical reactions between paint and wood.
To avoid quality problems in the use of the floor, you must do the following:
1. When the floor is laid, the floor, wall and wall base must be dry.
2. The ground should be flat.
3. The keel and the liner used must be dried and the moisture content should not exceed the local equilibrium moisture content.
4 The keel plane should be flat.
5. It is better to lay a layer of plastic film on the floor before laying the floor.
6. The moisture content of the wooden floor should be within the standard range and should not exceed the local equilibrium moisture content.
7. For the manufacturer, it is necessary to scientifically select tree species for the floor. For tree species that are not suitable for flooring, they must not be used.
8. Due to the different species of trees, the physical, chemical, and mechanical properties of the wood are different, so the factory should conduct tests when selecting paints. Confirm the adaptability of the paint to the wood species and scientifically select the paint to ensure that the paint meets the performance requirements.
9. When the wooden floor is laid, there should be enough expansion joints between the floor and the base of the wall, at the entrance, etc., according to the size of the room.
10. In the process of laying the floor, do not use water-soluble adhesive as much as possible to avoid swelling and deformation due to moisture absorbed by the floor.
11 Be sure to use cement to secure the keel when playing keel.
12. The indoor environment should not be too dry, nor should it be too humid. Especially in the winter in the north, the interior should be kept at a certain humidity to prevent cracking and deformation of the wooden floor.
13. When cleaning the floor, try not to use a mop with dripping water to clean the floor.
Flooring Considerations Nature Floor Paint Room Cement Door Price Function Sofa Bed Function Sofa
surveyor outside steel measuring tape
4x Retraction Measuring Tape,50m Retraction Measuring Tape,Survey Tape Measure
Shangqiu Acer Measuring Tool Co.,Ltd. , https://www.acertoolshn.com