Isca recently launched a series of new tools, continuing its 3P concept (high productivity, high performance, high profitability). These new products will be on display at CIMES (10th China International Machine Tool & Tools Exhibition, Beijing), which opened on June 12.
New tooling includes HELIDO series milling cutters for small parts and small angle spiral groove drills. Among them, ISCAR HELIDO series milling cutters have introduced 9mm blades such as H490 ANKX/ANCX 0904, mainly for small parts processing. Smaller inserts result in a more densely toothed tool that reduces the cutting load per tooth at the same machine feed efficiency. The HELIDO series of milling cutters has been continuously expanded. Currently, there are about 20 different types of end mills, the diameter covers 16-40mm, and the handle interface is cylindrical or side solid. Face milling cutters range in diameter from 32mm to 63mm, all in a mandrel connection.
Based on the existing HELIDO series of milling cutters, ISCAR has successfully introduced optimized milling cutters for cast iron face milling. The new HELIDO S865 FSN inherits all the features of the HELIDO series of milling cutters, but with a lead angle of 65o, which can effectively reduce burr collapse during cast iron machining. The HELIDO milling cutter forms an axial positive rake cutting that significantly reduces cutting forces and machine power losses, even at cutting depths of up to 8 mm. It is worth mentioning that the double-sided HELIDO inserts are economical and can effectively reduce the cost per blade. The spiral edge design reduces the cutting resistance when cutting into the workpiece. The 2mm bottom wiper design improves the finished surface finish. The inner cold hole of the new HELIDO 65o face milling cutter acts directly on each insert. The cutter body is available in standard tooth count and dense tooth construction with a diameter range of 50-125mm.
In addition, the improved ISCAR small-angle spiral groove drills are specifically designed for lathes or other horizontal hole machining machines to significantly improve the stability of non-rotating drilling operations. The ISDR lathe-specific DR drill adopts a small-angle spiral groove design and a high-strength tool steel cutter bar with a hardness of 55HRC, which improves the rigidity of the drill pipe. At the same time, the surface of the drill pipe is treated with HARD TOUCH phosphor coating to reduce the surface friction coefficient and smooth chip discharge.
We supply variety of 780nm IR LED(Infrared LED) products. Including Through-hole 780nm LED, SMD 780nm LED and high-power 780nm LED. We can also produce 780nm LED according to your requirement.
For the Through-hole Light Emitting Diode 780nm LED,
We can customize the shape, the lighting angle, the number of emitting source, the flat pin LED and braided LED. Such as: infrared 5mm 780nm LED with 5 degree, infrared 5mm 780nm LED with 20 degree, infrared 5mm 780nm LED with 30 degree, infrared 5mm 780nm LED with 45 degree, infrared 5mm 780nm LED with 60 degree, infrared 5mm 780nm with 90 degree, infrared 5mm 780nm LED with 120 degree. Infrared 3mm 780nm LED with 3 degree, infrared 3mm 780nm LED with 20 degree, infrared 3mm 780nm LED with 30 degree, infrared 3mm 780nm LED with 45 degree, infrared 3mm 780nm LED with 60 degree, infrared 3mm 780nm with 90 degree, infrared 3mm 780nm LED with 120 degree ect.
There are many other shapes or color of lens for your choose. Customized infrared LED are available
For the SMD LED 780nm LED,
We can supply dual-chip infrared LED, three-chip infrared LED, multi-chip infrared LED, high voltage LED, flashing infrared LED and variety of size SMD LED. For instance: 3528 SMD infrared 780nm LED, 2835 SMD infrared 780nm LED, 3014 SMD infrared 780nm LED, 1206 SMD infrared 780nm LED, 3020 SMD infrared 780nm LED.
There are also have many other shapes to choose, like the 5050 SMD infrared LED, the 5730 SMD infrared LED ect. You can choose any one of them for your requirement.
780nm led is a infrared LED(IR LED). Common infrared LEDs are like: 775nm IR LED, 778nm IR LED, 785nm IR LED and so on.
New tooling includes HELIDO series milling cutters for small parts and small angle spiral groove drills. Among them, ISCAR HELIDO series milling cutters have introduced 9mm blades such as H490 ANKX/ANCX 0904, mainly for small parts processing. Smaller inserts result in a more densely toothed tool that reduces the cutting load per tooth at the same machine feed efficiency. The HELIDO series of milling cutters has been continuously expanded. Currently, there are about 20 different types of end mills, the diameter covers 16-40mm, and the handle interface is cylindrical or side solid. Face milling cutters range in diameter from 32mm to 63mm, all in a mandrel connection.
Based on the existing HELIDO series of milling cutters, ISCAR has successfully introduced optimized milling cutters for cast iron face milling. The new HELIDO S865 FSN inherits all the features of the HELIDO series of milling cutters, but with a lead angle of 65o, which can effectively reduce burr collapse during cast iron machining. The HELIDO milling cutter forms an axial positive rake cutting that significantly reduces cutting forces and machine power losses, even at cutting depths of up to 8 mm. It is worth mentioning that the double-sided HELIDO inserts are economical and can effectively reduce the cost per blade. The spiral edge design reduces the cutting resistance when cutting into the workpiece. The 2mm bottom wiper design improves the finished surface finish. The inner cold hole of the new HELIDO 65o face milling cutter acts directly on each insert. The cutter body is available in standard tooth count and dense tooth construction with a diameter range of 50-125mm.
In addition, the improved ISCAR small-angle spiral groove drills are specifically designed for lathes or other horizontal hole machining machines to significantly improve the stability of non-rotating drilling operations. The ISDR lathe-specific DR drill adopts a small-angle spiral groove design and a high-strength tool steel cutter bar with a hardness of 55HRC, which improves the rigidity of the drill pipe. At the same time, the surface of the drill pipe is treated with HARD TOUCH phosphor coating to reduce the surface friction coefficient and smooth chip discharge.
We are 780nm LED manufacturer from China.
We will do the High temperature resistance testing and 10
hours ageing treatment before the product out off the factory, which can
ensure the stability of each product.
Our LED products have 5 year warranty.
We are the best supplier for your light-emitting diode.
We supply variety of 780nm IR LED(Infrared LED) products. Including Through-hole 780nm LED, SMD 780nm LED and high-power 780nm LED. We can also produce 780nm LED according to your requirement.
For the Through-hole Light Emitting Diode 780nm LED,
We can customize the shape, the lighting angle, the number of emitting source, the flat pin LED and braided LED. Such as: infrared 5mm 780nm LED with 5 degree, infrared 5mm 780nm LED with 20 degree, infrared 5mm 780nm LED with 30 degree, infrared 5mm 780nm LED with 45 degree, infrared 5mm 780nm LED with 60 degree, infrared 5mm 780nm with 90 degree, infrared 5mm 780nm LED with 120 degree. Infrared 3mm 780nm LED with 3 degree, infrared 3mm 780nm LED with 20 degree, infrared 3mm 780nm LED with 30 degree, infrared 3mm 780nm LED with 45 degree, infrared 3mm 780nm LED with 60 degree, infrared 3mm 780nm with 90 degree, infrared 3mm 780nm LED with 120 degree ect.
There are many other shapes or color of lens for your choose. Customized infrared LED are available
For the SMD LED 780nm LED,
We can supply dual-chip infrared LED, three-chip infrared LED, multi-chip infrared LED, high voltage LED, flashing infrared LED and variety of size SMD LED. For instance: 3528 SMD infrared 780nm LED, 2835 SMD infrared 780nm LED, 3014 SMD infrared 780nm LED, 1206 SMD infrared 780nm LED, 3020 SMD infrared 780nm LED.
There are also have many other shapes to choose, like the 5050 SMD infrared LED, the 5730 SMD infrared LED ect. You can choose any one of them for your requirement.
780nm led is a infrared LED(IR LED). Common infrared LEDs are like: 775nm IR LED, 778nm IR LED, 785nm IR LED and so on.
780nm LED,780nm IR LED,780nm Infrared LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com