Bim Hole Saw Cutter for Metal Wood Plastic Cutting

Description:
1. Compatible with a wide range of materials include steel, cast iron, nail, aluminum, copper, plastics, and wood
2. M3/M42 high speed steel bi-metal edge welded to alloy steel back for heavy duty cutting
3. Cutting Depth to 1-1/2"(38mm) and 1-7/8"(47mm)
4. Diameters from 9/16" -- 8-17/64" (14-210mm)
5. Attaches to the power drill via the arbor and the drill's chuck (most commonly 3/8 and 1/2 inch drill chucks)
6. Can be used in portable electric or pneumatic tools, vertical drill machines,Lathe,Boring/Milling Machines and Other Machine Tools
7. Cuts Through Stainless Steel and Other Materials Pipe,Nail-Embedded wood, Hard Wood Floors,Plywood and plastics.
8. All the specifications for arbored hole saws are the same as hole saws.There is an extra charge for the pilots.

Common applications:
1. Door hardware installation
2. Installing light fixtures
3. Installing drainage pipes
4. Making connections in pipes
5. Cutting vents in masonry
6. Making holes for pipework and plumbing
7. Cutting holes for electrical cables and wiring
8. Making a birdhouse

Product Pictures:





OSTAR can also provide Hole saw related Products:



Bi-Metal Hole Saws Operating Speed & Important:
For sale use of hole saws use the correct rotation speed. The correct speed for each size is given in the table.
 
For longer saw life and lower operating costs, the following recommendation need to be observed: 
1. Use the correct arbor for the size saw to be used. 
2. Use pin-type arbors for hole saws larger than Dia.32. When mounting, Lift up the disc with the pins and then screw the arbor down into the hole saw as far as it will go. Fit the drive pins into the pin holes in the hole saw by turning the hole saw backwards. Push the pins in .Check that they are securely locked. 
3. Check regularly to make sure the drive pins are in the right position. 
4. Check that the arbor shank is securely inserted in the chuck on the drive unit. Tighten with chuck key. 
5. Cutting oil should be used when sawing steel. Do not use cutting oil when sawing cast iron. The cutting pressure should, however, be high so that each tooth cuts deep. Paraffin can be used when sawing aluminium. 
 
6. Use the correct rotation speed! Too high or too low a speed will decrease the life of the cutting edge. 
7. If the hole saw vibrates during sawing, the teeth may became damaged and break. The result is often a rough, imperfect hole. 
8. Apply the hole saw perpendicular to the workpiece. If the hole saw is titled, this will cause uneven loading and abnormal wear on both the saw teeth and the grilling machine. Moreover, the dimensional accuracy of the hole saw can be affected. 
9. Clear away chips and slugs frequently in order to prevent overheating. 

Operating Speed For Bi-metal hole saws:
Contact Information:
Tel: +86-21-58870860
+86-21-20247707
+86-21-20247708
Fax: +86-21-58822295
Website: http://www.ostargroup.com/

Any interests in our products,pls kindly feel free to contact us.
We're here for you all the time! Description:
1. Compatible with a wide range of materials include steel, cast iron, nail, aluminum, copper, plastics, and wood
2. M3/M42 high speed steel bi-metal edge welded to alloy steel back for heavy duty cutting
3. Cutting Depth to 1-1/2"(38mm) and 1-7/8"(47mm)
4. Diameters from 9/16" -- 8-17/64" (14-210mm)
5. Attaches to the power drill via the arbor and the drill's chuck (most commonly 3/8 and 1/2 inch drill chucks)
6. Can be used in portable electric or pneumatic tools, vertical drill machines,Lathe,Boring/Milling Machines and Other Machine Tools
7. Cuts Through Stainless Steel and Other Materials Pipe,Nail-Embedded wood, Hard Wood Floors,Plywood and plastics.
8. All the specifications for arbored hole saws are the same as hole saws.There is an extra charge for the pilots.

Common applications:
1. Door hardware installation
2. Installing light fixtures
3. Installing drainage pipes
4. Making connections in pipes
5. Cutting vents in masonry
6. Making holes for pipework and plumbing
7. Cutting holes for electrical cables and wiring
8. Making a birdhouse

Product Pictures:





OSTAR can also provide Hole saw related Products:



Bi-Metal Hole Saws Operating Speed & Important:
For sale use of hole saws use the correct rotation speed. The correct speed for each size is given in the table.
 
For longer saw life and lower operating costs, the following recommendation need to be observed: 
1. Use the correct arbor for the size saw to be used. 
2. Use pin-type arbors for hole saws larger than Dia.32. When mounting, Lift up the disc with the pins and then screw the arbor down into the hole saw as far as it will go. Fit the drive pins into the pin holes in the hole saw by turning the hole saw backwards. Push the pins in .Check that they are securely locked. 
3. Check regularly to make sure the drive pins are in the right position. 
4. Check that the arbor shank is securely inserted in the chuck on the drive unit. Tighten with chuck key. 
5. Cutting oil should be used when sawing steel. Do not use cutting oil when sawing cast iron. The cutting pressure should, however, be high so that each tooth cuts deep. Paraffin can be used when sawing aluminium. 
 
6. Use the correct rotation speed! Too high or too low a speed will decrease the life of the cutting edge. 
7. If the hole saw vibrates during sawing, the teeth may became damaged and break. The result is often a rough, imperfect hole. 
8. Apply the hole saw perpendicular to the workpiece. If the hole saw is titled, this will cause uneven loading and abnormal wear on both the saw teeth and the grilling machine. Moreover, the dimensional accuracy of the hole saw can be affected. 
9. Clear away chips and slugs frequently in order to prevent overheating. 

Operating Speed For Bi-metal hole saws:
Contact Information:
Tel: +86-21-58870860
+86-21-20247707
+86-21-20247708
Fax: +86-21-58822295
Website: http://www.ostargroup.com/

Any interests in our products,pls kindly feel free to contact us.
We're here for you all the time!

Nylon Sanding Belt

This product is suitable for portable and desktop automatic grinding instruments, with elasticity and small grinding force, which can improve the grinding grain of workpiece well, and is easy to replace. Compared with traditional abrasive tools, nylon abrasive belt has the following advantages: it can control the minimum grinding amount, grinding depth, anti-blocking, and the probability of exceeding tolerance is the smallest. The product continuously exposes new abrasive layer during the grinding process, and the grinding effect is good.

1. Great multi-purpose belt, ideal for cleaning, finishing, blending and deburring
2. Nylon film backing is stretch resistant for close, ongoing cutting action
3. The film backed belts work great on stroke sanders when reduced friction on the back of the belt is desired
4. Gaps between nylon fibers allow debris to escape, helping to reduce loading
5. Fibers break down gradually to reveal fresh mineral, producing consistent cuts
6. Available in a range of grades, minerals and converted forms,Coarse( Brown 150# ), Medium ( Red 240# ), Fine ( Blue 400# ) , Very Fine ( Grey 600 # )
Our Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.

We distributes and wholesales various brands of Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive, Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers.

Ideal for Robotic Finishing
With a wide range of conformability options and high consistency, long-lasting industrial abrasives are a great option for robotic metal finishing. Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing.

Multi-Purpose Belt Great for Tackling Multiple Applications
Working on flat parts especially - requires a belt that will abrade the surface closely. Our Surface Conditioning Film Backed Belt was designed to do just that. The nylon-backed belt has a reduced friction backing and is low stretch, so it's unlikely to yield or stretch when run. This belt backing works well when the standard scrim belts stretch and fall off the machine.

Versatile Belt Options

One of the best benefits of our Surface Conditioning Film Backed Belt is its versatility. Offered in a range of minerals, grades and converted forms, you're likely to find the right match for your application. Choose between silicon carbide or aluminum oxide mineral. Aluminum Oxide is available in coarse (CRS), very fine (VFN), and medium (MED) grades. Silicon carbide is available in super fine (SFN), very fine (VFN), and medium (MED) grades. Aluminum oxide is a synthetic mineral known for its sharp cut, durability and long life. Silicon carbide tends to break down faster than aluminum oxide but will also produce a finer finish.

The Many Benefits of Our Belts Available in narrow, wide and standard sizes, this belt is commonly run on a belt sander. Given their narrow widths, narrow belts tend to be a good match for workpieces with narrow areas and nooks and crannies, like lobes on a crankshaft or camshaft. Conversely, wide belts are a good match for larger workpieces like stamped parts, sheet metal parts, or dies. Independent of belt chosen, operators can rely on consistent performance; it's what they've come to expect from our abrasives. Non woven technology makes our industrial abrasives - and belts - unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web.

Surface Conditioning Belt work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal.

Nylon Sanding Belt,Fiber Abrasive Belts,Woven Nylon Sanding Belt,Nylon Abrasive Sanding Belt,surface conditioning belt

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com