Solid wood flooring is popular among consumers because of its beautiful appearance, no pollution, good heat preservation and durability. It has become an ideal material for floor decoration in bedroom, living room and study room. However, there are advantages and disadvantages. If the follow-up maintenance is not good, it is easy to cause a series of problems. Today, Xiaobian will sort out the six "common diseases" and maintenance skills of solid wood flooring:
Common disease, quilting
Some floors were laid for a few days, and there was a big gap between the slats. Most of this is related to the high moisture content before the floor is laid, and it shrinks due to high temperature or air drying in the room. The moisture content before the floor is laid should be in the range of 8%-13%, and it should be oiled in time after the paving.
Common disease 2, sound
Due to the low quality of the floor laying, people will make a creaking sound when walking around. To this end, it is necessary to pay attention to the solid connection between the keel and the ground, the floor and the keel, and the number and length of the nails are appropriate. At the same time, it is necessary to prevent the keel spacing from being too large or the water content to be too high, otherwise the drying and shrinking looseness after laying will also have a certain influence.
Common disease three, dirty board
It means that some floors are painted, giving people an unclean gray feeling, and some even the footprints are clearly visible. To avoid this, it is important to keep the surface of the board clean before polishing.
Common disease four, painted face
With the slats of the same tree species, the color will also vary greatly. If it is not properly laid, it will be easy to present a "flower face." When using varnish wood floor, especially for tree slats with great chromatic aberration, the selection and deployment of slats should be considered to make the color of the floor from shallow to deep, or gradually transition from deep to shallow.
Common disease five, starting the drum
In order to ensure that the floor can not be drum, pay attention to three points: First, the solid wood floor can not be laid immediately at the end of the civil engineering; Second, if the living room is in a humid environment, it is appropriate to lay a moisture-proof floor; The rate cannot be lower than 6%.
Common disease six, uplift
This is mainly because the solid wood floor is not caused by the regular drying process. When installing, a layer of plastic film can be placed under the floor to protect against moisture and prevent the floor from lifting. On the other hand, it has a certain sound insulation effect. In addition, the floor is placed in the room to be laid two or three days in advance to adapt the wood to the indoor temperature, which also helps prevent lifting.
Solid wood floor maintenance tips:
During this period of time, the temperature changes repeatedly, and the problem of resurgence plagues many owners. What should be done to maintain the solid wood floor?
First of all, the solid wood floor should be cleaned first to prevent it from breeding bacteria. When cleaning, it is best to use a dust collector to remove surface dirt and dust, so as to avoid some sand and stone rubbing against the ground when the garbage is removed.
Secondly, use a wrung rag when wiping the solid wood floor. Using a damp rag, some moisture can seep into the seams, causing the floor to deform and lift.
Finally, apply a layer of floor wax evenly on the surface when waxing. After a little drying, wipe with a soft cloth until it is smooth and bright. “At the same time, open the window as much as possible to keep the air flowing inside the house. If the weather is very dry, you can use a humidifier to adjust the indoor humidity.â€
Basin Mixers,Basin Mixer Tap,Wash Basin Mixer,Hot And Cold Wash Basin Mixer
JIAHAOJIA SANITARY WARE INDUSTRY CO., LTD. , https://www.gagalfaucet.com